Code Contents Solutions
36 Module error.
The program to be downloaded
does not exist on the main unit.
The download destination
specified by the card does not
match up to the destination for the
main unit’s program.
• Install the program to be updated in
advance.
• There is a possibility that the SD card
containing the program to be updated has
not been mounted. Check to confirm that the
SD card has been correctly mounted.
• The SD card is incorrect if the program to be
updated has been correctly installed. In this
case, insert the correct SC card.
38 The version of the downloaded
program has not been authorized
for the update.
• Make sure that the program to be
overwritten is the specified version.
40 Engine download fails. • Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board and the BCU.
41 Fax download fails. • Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board and the FCU board.
42 Control panel / language
download fails.
• Switch the main power supply off and on to
try again.
• If the download fails again, replace the
controller board and the operation panel
unit.
43 Printing download fails. • Switch the main power supply off and on to
try again.
• The SD card is damaged if the update fails
again. Replace the SD card.
5. System Maintenance
682
To Next Page
Loading...
