No. Result Description
7 Name resolution error
Cannot download or update as the name cannot be
resolved upon downloading the update.
8 Auto update setting disabled
The package has been downloaded but will not run the
update as SP5-886-111 (auto update setting) is
disabled and SP5-886-115 (auto download setting for
SFU) is enabled.
9 Update prohibited time
Cannot start to update as the auto update prohibited
time setting (SP5-886-112) is enabled and the time
update initiated was in the range of prohibited time
(SP5-886-113 to 114).
Or the day which update was initiated was a day for
which update was prohibited (SP5-886-120).
10
Update postponed due to machine
in use
Cannot start update due to the following conditions
when update was initiated.
• The machine is in use by a user (the panel was
used within 30 seconds)
• Machine offline for other reasons
• Operation prohibited
• Displaying SP/UP menu
• Firmware update is running with another method
• Configuration change prohibited
• Verifying the operation panel (smart panel)
11 Update cancelled by user
Update was cancelled because a user selected
"Cancel" in the popup shown before starting the
update.
12 Offline failed
Cannot start to update as the machine is offline for
other reasons.
13 Update successful Update was started and successfully completed.
14 Update failed Update was started but failed.
Firmware Update (Auto Remote Firmware Update)
711
To Next Page
Loading...
Need help?
General
