Name: Ricoh MP C2504
Brand: Ricoh
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SC No. Type Error Name/Error Condition/Major Cause/Solution

Check if the SC occurs by turning the power OFF then ON. If the SC occurs again, do the following

steps. Check if the SC reoccurs by cycling the power after each step.

1. Check the PCU for the following points and recover or replace the PCU if there are any defects.

• Checking contaminants on the Charge Roller terminal [A]

• Checking damage or deformation of the Charge Roller terminal [A]

• Checking continuity to the Charge Roller terminal core bar [B]

2. Check if all connectors related to PCDU are connected securely. Replace the connectors if they

are disconnected, or loose.

3. Recover or replace the parts of the main machine if there are any defects after checking the

following points.

• Checking contaminants on the charged power supplying plate [C]

• Checking damage or deformation of the charged power supplying plate [C]

• Checking continuity between the Charge Roller terminal core bar and the HVP (CB)

4. Replace the HVP (CB).

5. If SC occurs again, replace the BCU.

Service Call 312-396

793

Questions and Answers:

Need help?

Do you have a question about the Ricoh MP C2504 and is the answer not in the manual?

Ricoh MP C2504 Specifications

General