EasyManuals Logo

Ricoh MP C2504 User Manual

Ricoh MP C2504
1923 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #803 background imageLoading...
Page #803 background image
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC324-01 D Development motor: Bk: Lock
Motor status is observed at 100ms intervals during motor ON, and the
unlock status is detected at least 20 times
Motor defective
Connector disconnected
Harness broken
IOB defective
Development unit torque increased
Replace the motor
Reconnect the connector
Replace the harness
Replace the Imaging IOB.
Replace the development unit
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC324-05 D Development motor: CMY: Lock
Motor status is observed at 100ms intervals during motor ON, and the
unlock status is detected at least 20 times.
Motor defective
Connector disconnected
Harness broken
IOB defective
Development unit torque increased
Replace the motor
Reconnect the connector
Replace the harness
Replace the Imaging IOB.
Replace the development unit
6. Troubleshooting
794

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MP C2504 and is the answer not in the manual?

Ricoh MP C2504 Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print Resolution1200 x 1200 dpi
Scan TypeFlatbed, ADF
Max Scan Resolution600 x 600 dpi
Copy Resolution600 x 600 dpi
Max Paper SizeA3
Duplex PrintingYes
Memory (RAM)2 GB
Print Speed25 ppm (A4)
Copy Speed25 cpm (A4)
Fax Resolution200 x 200 dpi
Paper Capacity1200 sheets
ConnectivityUSB, Ethernet, Wi-Fi
Dimensions587 x 685 x 913 mm
Control Panel9-inch Smart Operation Panel

Related product manuals