4. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
5. Close the SPDF/ARDF or the platen cover.
6. Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
- Printer mode -
1. "Printer Function" > "Start"
2. Select a test pattern.
• Print each ACC test pattern. There are 5 test patterns as follows:
Test Pattern 1: 600x600 dpi
Test Pattern 2: 1800x600 dpi
Test Pattern 3: 9000x600 dpi
Test Pattern 4: 1200x1200 dpi
Test Pattern 5: 3600x1200 dpi
3. Press "Start Printing".
4. Put the printout on the exposure glass.
5. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
6. Close the SPDF/ARDF or the platen cover.
7. Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
Main Machine Installation
79
To Next Page
Loading...
