8. Repeat steps 1 to 7 until all the ACC test patterns have been printed.
2. Exit the User Tools mode.
3. Press the “Document Server” icon.
Or press and hold the [A] key and "Check Status [B]" at the same time until the number
keyboard screen is displayed.
4. Enter the key code for SP mode.
5. Perform line adjustment.
1. Execute SP2-111-004 (Forced Line Position Adj. Mode d)
2. The result can be checked with SP2-194-007 (MUSIC Execution Result)
0: Success, 1: Failure
2. Installation
80
To Next Page
Loading...
