EasyManua.ls Logo

Ricoh MP C2504 - Page 963

Ricoh MP C2504
1923 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No. Type Error Name/Error Condition/Major Cause/Solution
SC876-04 D Log Data Error 4
An error was detected in the handling of the log data at power on or
during machine operation.
Log encryption key is disabled but the log data file is encrypted.
(NVRAM data corruption)
Log encryption key is enabled but the log data file is not encrypted.
(NVRAM data corruption)
Initialize the HDD (SP5-832-004).
No. Type Error Name/Error Condition/Major Cause/Solution
SC876-05 D Log Data Error 5
An error was detected in the handling of the log data at power on or
during machine operation.
Only the NV-RAM has been replaced with one previously used in
another machine.
Only the HDD has been replaced with one previously used in
another machine.
Attach the original NV-RAM.
Attach the original HDD.
With the configuration that caused the SC, initialize the HDD
(SP5-832-004).
No. Type Error Name/Error Condition/Major Cause/Solution
SC876-99 D Log Data Error 99
An error was detected in the handling of the log data at power on or
during machine operation.
Other causes
-
6. Troubleshooting
954

Table of Contents

Related product manuals