NXP Semiconductors K22F series User Manual

For a list of properties and their associated 32-bit property tags supported by the Kinetis
Flashloader, see Table 13-43.
The 32-bit property tag is the only parameter required for GetProperty command.
Table 13-18. Parameters for GetProperty Command
Byte # Command
0 - 3 Property tag
Process command
Host
Target
GetProperty: Property tag = 0x01
0x5a a4 08 00 73
d4 07 00 00 01 01 00 00 00
0x5a a4 0c 00 07 7a a7 00 00 02 00 00 00 00 00 00 01 4
b
ACK:
0x5a a1
ACK:
0x5a a1
Generic Response:
Figure 13-7. Protocol Sequence for GetProperty Command
Table 13-19. GetProperty Command Packet Format (Example)
GetProperty Parameter Value
Framing packet start byte 0x5A
packetType 0xA4, kFramingPacketType_Command
length 0x08 0x00
crc16 0x73 0xD4
Command packet commandTag 0x07 – GetProperty
flags 0x00
reserved 0x00
parameterCount 0x01
propertyTag 0x00000001 - CurrentVersion
The GetProperty command has no data phase.
Functional Description
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
310 NXP Semiconductors

NXP Semiconductors K22F series Specifications

General

Brand	NXP Semiconductors
Model	K22F series
Category	Controller
Language	English