NXP Semiconductors K22F series - Page 943

Address: Base address + 94h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
CH7OCV CH6OCV CH5OCV CH4OCV CH3OCV CH2OCV CH1OCV CH0OCV
CH7OC CH6OC CH5OC CH4OC CH3OC CH2OC CH1OC CH0OC
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FTMx_SWOCTRL field descriptions
Field Description
31–16
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
15
CH7OCV
Channel 7 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
14
CH6OCV
Channel 6 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
13
CH5OCV
Channel 5 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
12
CH4OCV
Channel 4 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
11
CH3OCV
Channel 3 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
10
CH2OCV
Channel 2 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
9
CH1OCV
Channel 1 Software Output Control Value
0 The software output control forces 0 to the channel output.
1 The software output control forces 1 to the channel output.
8
CH0OCV
Channel 0 Software Output Control Value
Table continues on the next page...
Chapter 39 FlexTimer Module (FTM)
K22F Sub-Family Reference Manual, Rev. 4, 08/2016
NXP Semiconductors 943