Interconnect matrix RM0444
276/1390 RM0444 Rev 5
List of possible source of break are described in:
• Section 21.3.16: Using the break function (TIM1)
• Section 25.4.13: Using the break function (TIM15/TIM16/TIM17)
• Figure 236: TIM15 block diagram
• Figure 237: TIM16/TIM17 block diagram
Relevant power modes
These interconnections operate in Run, Sleep, Low-power run, and Low-power sleep power
modes.
9.3.11 From TIM16, TIM17, USART1, and USART4, to IRTIM
Purpose
TIMx_OC1 output channel of TIM16 or TIM17 timers, associated with USART1 or USART4
transmission signal, can generate the infrared output waveform.
The functionality is described in Section 27: Infrared interface (IRTIM).
Relevant power modes
These interconnections operate in Run, Sleep, Low-power run, and Low-power sleep power
modes.
9.3.12 From TIM14, LPTIM1, and LPTIM2, to DMAMUX
Purpose
TIM14 general-purpose timer, LPTIM1 and LPTIM2 low-power timers, and EXTI, can be
used as triggering event to DMAMUX.
Relevant power modes
These interconnections operate in Run, Sleep, Low-power run, and Low-power sleep power
modes.
To Next Page
Loading...
