DocID024597 Rev 3 1249/1693
RM0351 Low-power universal asynchronous receiver transmitter (LPUART)
1282
An Idle character is interpreted as an entire frame of “1”s. (The number of “1” ‘s will include
the number of stop bits).
A Break character is interpreted on receiving “0”s for a frame period. At the end of the
break frame, the transmitter inserts 2 stop bits.
Transmission and reception are driven by a common baud rate generator, the clock for each
is generated when the enable bit is set respectively for the transmitter and receiver.
The details of each block is given below.
To Next Page
Loading...
Need help?
General
