DocID024597 Rev 3 1399/1693
RM0351 SD/SDIO/MMC card host interface (SDMMC)
1450
Figure 472. SDMMC_CK clock dephasing (BYPASS = 0)
Command path
The command path unit sends commands to and receives responses from the cards.
Figure 473. SDMMC adapter command path
• Command path state machine (CPSM)
– When the command register is written to and the enable bit is set, command
transfer starts. When the command has been sent, the command path state
machine (CPSM) sets the status flags and enters the Idle state if a response is not
required. If a response is required, it waits for the response (see Figure 474 on
page 1400). When the response is received, the received CRC code and the
internally generated code are compared, and the appropriate status flags are set.
06Y9
6'00&&/.
6'00&B&.
1(*('*( 1(*('*(
&0''DWD
RXWSXW
DLE
$GDSWHUUHJLVWHUV
&0'
6WDWXV
IODJ
&5&
6KLIW
UHJLVWHU
&0'
7RFRQWUROXQLW
6'00&B&0'LQ
6'00&B&0'RXW
7R$3%LQWHUIDFH
&RQWURO
ORJLF
&RPPDQG
WLPHU
$UJXPHQW
5HVSRQVH
UHJLVWHUV
To Next Page
Loading...
Need help?
General
