ST STM32L4x6 User Manual

Low-power timer (LPTIM) RM0351
1042/1693 DocID024597 Rev 3
30.7.6 LPTIM compare register (LPTIMx_CMP)
Address offset: 0x14
Reset value: 0x0000 0000
30.7.7 LPTIM autoreload register (LPTIMx_ARR)
Address offset: 0x18
Reset value: 0x0000 0001
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMP[15:0]
rw
Bits 31:16 Reserved, must be kept at reset value.
Bits 15:0 CMP: Compare value
CMP is the compare value used by the LPTIM.
The LPTIMx_CMP register’s content must only be modified when the LPTIM is enabled (ENABLE bit
is set to ‘1’).
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR[15:0]
rw
Bits 31:16 Reserved, must be kept at reset value.
Bits 15:0 ARR: Auto reload value
ARR is the autoreload value for the LPTIM.
This value must be strictly greater than the CMP[15:0] value.
The LPTIMx_ARR register’s content must only be modified when the LPTIM is enabled (ENABLE bit
is set to ‘1’).

ST STM32L4x6 Specifications

General

Brand	ST
Model	STM32L4x6
Category	Microcontrollers
Language	English