DocID024597 Rev 3 783/1693
RM0351 Advanced-control timers (TIM1/TIM8)
856
the Center-aligned mode (up/down counting) on page 763.
Figure 225 shows some center-aligned PWM waveforms in an example where:
• TIMx_ARR=8,
• PWM mode is the PWM mode 1,
• The flag is set when the counter counts down corresponding to the center-aligned
mode 1 selected for CMS=01 in TIMx_CR1 register.
Figure 225. Center-aligned PWM waveforms (ARR=8)
Hints on using center-aligned mode
• When starting in center-aligned mode, the current up-down configuration is used. It
means that the counter counts up or down depending on the value written in the DIR bit
&&[,)
&RXQWHUUHJLVWHU
&&5[
2&[5()
&06
&06
&06
&&[,)
&&5[
2&[5()
&06 RU
&&[,)
&&5[
2&[5()
&06
&06
&06
µ¶
&&[,)
&&5[!
2&[5()
&06
&06
&06
µ¶
&&[,)
&&5[
2&[5()
&06
&06
&06
µ¶
$,E