3. In [Address Book], click [Browse...].
4. Select the Address Book file, and then click [Open].
Select “Machinemodel_addr.csv”.
The Address Book appears.
5. Specify the destination.
For details about sending the file, see “Sending Fax Documents from Computers”.
• p.317 "Sending Fax Documents from Computers"
LAN-Fax Operation Messages
This section explains typical operation error messages displayed on the computer when using the LAN-
Fax Driver, and solutions to those messages.
Message Causes and Solutions
The number of entries in Destinations exceed
the limits. Up to 500 entries can be entered.
The number of destinations specified exceeds the
maximum possible. The maximum number of
destinations that can be specified at one time is 500.
“LAN-Fax” has already been launched.
Cannot launch it again.
The [LAN-Fax] dialog box is already open. Quit
LAN-Fax once, and then start it up again.
Failed to allocate memory. Available memory on the computer is insufficient.
Quit applications currently not in use.
6. Fax via Computer
340
To Next Page
Loading...
