Using the WSD Port
This section explains how to install the PostScript 3 printer driver for use on the WSD port.
• The WSD Port can be used under Windows Vista/7, or Windows Server 2008/2008 R2.
•
You can connect to the machine only if both the machine and computer are on the same network
segment, or "Network discovery" is enabled. For details, see Windows Help.
Installing the PostScript 3 Printer Driver (Windows Vista, Windows Server
2008)
This section explains how to install the PostScript 3 printer driver under Windows Vista or Windows
Server 2008 for use on the WSD port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Click [Start], and then click [Network].
The [Network] window appears, and the device search begins automatically.
3. Right-click the machine's icon, and then click [Install].
If the [User Account Control] dialog box appears, click [Yes] or [Continue].
The [Found New Hardware] dialog box appears.
4. Click [Locate and install driver software (recommended)].
If the [User Account Control] dialog box appears, click [Yes] or [Continue].
5. Click [Browse my computer for driver software (advanced)].
6. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
7. Click [Browse...], and then specify a location for the printer driver.
If the CD-ROM drive letter is D, the printer driver's source files are stored in "D:\X86 or
X64\DRIVERS\PS\XP_VISTA or X64\MUI\DISK1".
8. Click [Next].
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
1. Windows Configuration
18
To Next Page
Loading...
