Aficio MP 2352 - Installing the Postscript 3 Printer Driver (Windows Vista;7, Windows Server 2008 - TCP;IP)

• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
•
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server
2008 - TCP/IP)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008 for use on the SmartDeviceMonitor for Client port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Add a local printer].
6. Click [Create a new port:], and then select [SmartDeviceMonitor] in [Type of port:].
7. Click [Next].
8. Click [TCP/IP], and then click [Search].
A list of machines using TCP/IP appears.
9. Select the machine you want to use, and then click [OK].
Only machines that respond to a broadcast from the computer appear. To use a machine not listed
here, click [Specify Address], and then enter the IP address or host name of the machine.
10. Check that the name of the machine whose driver you want to install is selected, and then
click [Next].
1. Windows Configuration
24
1