Using the SmartDeviceMonitor for Client Port
This section explains how to install the PostScript 3 printer driver for use on the SmartDeviceMonitor for
Client port. To use this function, you must first download SmartDeviceMonitor for Client from the
manufacturer's Web site and install it on your computer. Contact your local dealer for information on
downloading SmartDeviceMonitor for Client.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003 / 2003 R2 - TCP/IP)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server
2003 /2003 R2 for use on the SmartDeviceMonitor for Client port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
7. Click [Create a new port:].
8. Click [SmartDeviceMonitor] in [Type of port:], and then click [Next >].
9. Click [TCP/IP], and then click [Search].
A list of machines using TCP/IP appears.
10. Select the machine you want to use, and then click [OK].
Only machines that respond to a broadcast from the computer appear. To use a machine not listed
here, click [Specify Address], and then enter the IP address or host name of the machine.
Using the SmartDeviceMonitor for Client Port
21
To Next Page
Loading...
