Be sure to enter the same login user name and login password that is registered on the
machine or the server. Printing will not start unless you enter a valid login user name and login
password.
8. Click [OK] to close the [Authentication] dialog box.
9. Click [OK] to close the printing preferences dialog box.
• When you use the user authentication function, user code setting becomes invalid.
•
When logged in using a printer driver, logging out is not required.
• Depending on the applications, the settings you make here may not be used as the default settings.
• For details about the printer driver setting screen, see "Displaying the Printer Driver Settings
Screen", Printer Reference.
Logging in Using Web Image Monitor
This section explains how to log in to the machine via Web Image Monitor.
1. Click [Login] on the top page of Web Image Monitor.
2. Enter a login user name and password, and then click [Login].
• For user code authentication, enter a user code in "Login User Name", and then click [Login].
Logging out Using Web Image Monitor
1. Click [Logout] to log out.
• Delete the cache memory in Web Image Monitor after logging out.
User Lockout Function
If an incorrect password is entered several times, the User Lockout function prevents further login
attempts under the same user name. Even if the locked out user enters the correct password later,
authentication will fail and the machine cannot be used until the lockout period elapses or an
administrator or supervisor disables the lockout.
To use the lockout function for user authentication, the authentication method must be set to Basic
authentication. Under other authentication methods, the lockout function protects supervisor and
administrator accounts only, not general user accounts.
If User Authentication is Specified
89
To Next Page
Loading...
