Software Supplied on CD-ROM
This section explains the applications on the supplied CD-ROM.
Auto-Run Program
This section explains the auto-run program.
When the CD-ROM is inserted into a client computer running Windows XP/Vista/7 or Windows Server
2003/2003 R2/2008/2008 R2, the installer starts up automatically (auto run) to install various
software.
• For installation, log in as an Administrators group member.
•
Auto-run program may not automatically work with certain operating system settings. If this
happens, start "Setup.exe" on the CD-ROM root directory.
• To disable auto-run, set CD-ROM while pressing the Shift key. Keep the Shift key pressed until the
computer finishes reading from the CD-ROM.
• If [Cancel] is clicked during installation, the installation of all the software thereafter will be
stopped. If cancelled, reinstall the remaining software after restarting the client computer.
TWAIN Driver
This section tells you the file path to the TWAIN driver and the TWAIN driver's system requirements.
You must install this driver if you want to scan originals or use the machine as a network TWAIN
scanner.
File path
The TWAIN driver is stored in the following folder on the CD-ROM:
\DRIVERS\TWAIN
System requirements
•
Computer hardware
PC/AT-compatible machines that support the operating system properly
• Operating system
*
Microsoft Windows XP/Vista/7
Microsoft Windows Server 2003/2003 R2/2008/2008 R2
* Operates in 32-bit compatibility mode on 64-bit operating systems
• Display resolution
10. Appendix
212
To Next Page
Loading...
