General Settings
This section describes the user tools in the General Settings menu under Facsimile Features.
Quick Operation Key (1-3)
Frequently used functions programmed as Quick Operation keys are shown on the menu
immediately after the power is turned on.
If [On] is selected, the Quick Operation keys can be programmed with the following items:
•
On
• Manual E-mail RX
• Send Later
• Subject
• Text
• Recept. Notice
• E-mail TX Results
• BCC Transmission
• Std. Message
• Fax Header Print
• Label Insertion
• Closed Network
• SUB Code TX
• SEP Code Reception
• Stamp
• Print Memory Lock
• TX File Status
• RX File Status
• Journal
• Print Stored RX File
• TX Status Report
• Forwarding
• Switch RX Mode
• Off
Up to three functions can be programmed to Quick Operation keys.
Functions that are highlighted have already been set.
General Settings
349
To Next Page
