Advanced Printing
This section explains the machine's advanced printing functions.
Other than the functions that can be configured in the [One Click Presets] tab, various print functions can
be set up from the [Menu:] icons in the [Detailed Settings] tab. The settings for each function described in
this section can be changed by using the following menus.
Menu Names and Brief Overview of Each Function
The following is an overview of the settings that are available using the [Finishing], [Paper], and [Effects]
menus in the [Menu:] area.
The PCL 6 printer driver's menus are shown as examples. For details about the PCL 5e printer driver, see
the printer driver Help.
Finishing menu
You can enable/disable collate, staple, and punch functions.
•
Collate
When printing multiple sets of documents such as handouts for meetings, you can have prints
delivered in batches of ordered sets.
• Staple
With an optional finisher installed, sets can be stapled individually when printing multiple sets.
• Punch
With an optional finisher and punch unit installed, holes can be punched into printed outputs.
Paper menu
You can enable/disable the cover and slip sheets function.
• Front Cover sheet/ Back Cover sheet
Using this function, you can insert cover sheet/ back cover sheet fed from a different tray to
that of the main paper, and print on them.
• Chapter Page
Using this function, you can have specified pages always printed on the same side as the first
page, or have chapter slip sheets inserted before specified pages.
• Slip Sheet
A slip sheet can be inserted between each page.
Effects menu
• Watermarks
2. Printing Documents
76
To Next Page
Loading...
