Aficio MP 2352 - When Using IPP with Smartdevicemonitor for Client

When Using IPP with SmartDeviceMonitor for
Client
When using IPP with SmartDeviceMonitor for Client, note the following:
To use this function, you must first download SmartDeviceMonitor for Client from the manufacturer's
Web site and install it on your computer. Contact your local dealer for information on downloading
SmartDeviceMonitor for Client.
•
The network printer can only receive one print job from SmartDeviceMonitor for Client at a time.
While the network printer is printing, another user cannot access it until the job is finished. In this
case, SmartDeviceMonitor for Client tries to access the network printer until the retry interval
expires.
• If SmartDeviceMonitor for Client cannot access the network printer and times out, it will stop
sending the print job. In this case, you should cancel the paused status from the print queue
window. SmartDeviceMonitor for Client will resume access to the network printer. You can delete
the print job from the print queue window, but canceling a print job printed by the network printer
might cause the next job sent from another user to be incorrectly printed.
• If a print job sent from SmartDeviceMonitor for Client is interrupted and the network printer cancels
the job because something went wrong, send the print job again.
• Print jobs sent from another computer do not appear in the print queue window, regardless of
protocol.
• If various users send print jobs using SmartDeviceMonitor for Client to network printers, the printing
order might not be the same as that in which the jobs were sent.
• An IP address cannot be used for the IPP port name because the IP address is used for the
SmartDeviceMonitor for Client port name.
• When setting SSL, a protocol for encrypted communication, under the environment where the
device certificate is installed, enter "https://( machine's IP address or host name)/ ". Internet
Explorer must be installed on your computer. Use the highest version. Internet Explorer 6.0 or
higher is recommended.
• If the [Security Alert] dialog box appears when accessing the machine using IPP to create or
configure an IPP port, or when printing, install the certificate. To select the certificate store location
when using Certificate Import Wizard, click [Place all certificates in the following store], and then
click [Local Computer] under [Trusted Root Certification Authorities].
• For details about SSL settings, consult your network administrator.
4. Monitoring and Configuring the Machine
146
4