D:\X86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
•
64bit-driver
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
13. Click [OK] to close the [Install From Disk] window.
14. Select the manufacturer and model name of the machine you want to use, and then click
[Next].
15. Follow the instructions on the screens.
According to your needs, you may change the machine name, configure the machine as a default
printer and/or a shared printer, and print a test page.
16. Click [Finish].
If installation is successful, the icon of the printer connected to the WSD port is added to the
[Devices and Printers] window.
• The port name that follows "WSD" uses random character strings. It cannot be changed freely.
•
To stop installation of the selected driver, click [Cancel] before the installation is complete. When
re-installing the WSD Port, right-click the machine's icon in the [Network] window, and then click
[Uninstall].
Using the SmartDeviceMonitor for Client Port
This describes how to install the printer driver using the SmartDeviceMonitor for Client port.
To use this function, you must first download SmartDeviceMonitor for Client from the manufacturer's
Web site and install it on your computer. Contact your local dealer for information on downloading
SmartDeviceMonitor for Client.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
Installing the PCL printer driver (TCP/IP)
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
1. Preparing the Machine
28
To Next Page
Loading...
