Limiting Machine Operations to Customers
Only
The machine can be set so that operation is impossible without administrator authentication.
The machine can be set to prohibit operation without administrator authentication and also prohibit
remote registration in the Address Book by a service representative.
We maintain strict security when handling customers' data. Administrator authentication prevents us from
operating the machine without administrator permission.
Use the following settings.
•
Service Mode Lock
Settings
This can be specified by the machine administrator.
For details about logging in and logging out with administrator authentication, see "Logging in Using
Administrator Authentication" and "Logging out Using Administrator Authentication".
Service Mode Lock
This can be specified by the machine administrator. Service mode is used by a service
representative for inspection or repair. If you set "Service Mode Lock" to [On], service mode
cannot be used unless the machine administrator logs on to the machine and cancels the service
mode lock to allow the service representative to operate the machine for inspection and repair. This
ensures that the inspection and repair are done under the supervision of the machine administrator.
• p.35 "Logging in Using Administrator Authentication"
•
p.36 "Logging out Using Administrator Authentication"
Specifying Service Mode Lock
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
Limiting Machine Operations to Customers Only
267
To Next Page
Loading...
