Using NetWare
This section describes the setting procedure for network printers in the NetWare environment. In the
NetWare environment, you can connect the machine as a "print server" or "remote printer".
• IPv6 cannot be used on this function.
• This function supports NetWare 6.5.
•
This procedure assumes an environment is already prepared for normal NetWare running the
printing service setting.
• The procedure is explained with the following example settings:
• File server's name ...CAREE
• Print server's name ...PSERV
• Printer's name ...R-PRN
• Queue name ...R-QUEUE
Setting Up as a Print Server
To configure this machine as a print server using NetWare, follow the procedure below.
• If you want to use the printer as a print server, set it to the NDS mode.
•
Set the printer as a print server.
1. Start Web Image Monitor.
2. Click [Login].
A dialog box for entering the login user name and password appears.
3. Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
Depending on the configuration of your Web browser, the login user name and password might be
saved. If you do not want to save them, configure your Web browser's settings so that this
information is not saved.
4. In the menu area, click [Configuration].
3. Using a Printer Server
124
To Next Page
Loading...
