Using the IPP Port
This section explains how to install the PostScript 3 printer driver for use on the IPP port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
• In an IPv6 environment, you cannot use the IPP Port. Use the SmartDeviceMonitor for Client port.
• To print via IPP-SSL, use the SmartDeviceMonitor for Client port.
• To print via IPP-SSL under Windows Vista/7 or Windows Server 2008/2008 R2, you must install
the certificate on your computer before you install the printer driver using the IPP port. For details,
consult your administrator.
• p.21 "Using the SmartDeviceMonitor for Client Port"
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003/
2003 R2)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server
2003/2003 R2 for use on the IPP port.
1. Quit all applications currently running.
2. On the [Start] menu, click [Printers and Faxes].
3. Click [Add a printer].
The [Add Printer Wizard] dialog box appears.
4. Click [Next>].
5. Click [A network printer, or a printer attached to another computer].
6. Click [Next>].
7. Click [Connect to a printer on the Internet or on a home or official network:].
8. In the [URL:] box, enter "http:// machine's IP address/printer (or ipp)" as the machine's
address, and then click [Next>].
9. Click [Have Disk...].
10. Insert the provided CD-ROM into the computer's CD-ROM drive.
If Auto Run starts, click [Cancel], and then [Exit].
1. Windows Configuration
12
To Next Page
Loading...
