3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Add a local printer].
6. Click [Create a new port:], and then select [Standard TCP/IP Port] in [Type of port:].
7. Click [Next].
8. Select [TCP/IP Device] in [Device type].
9. Enter the machine's IP address in [Hostname or IP address:], and then click [Next].
The [Port name:] text box automatically obtains a port name. Change this name if necessary.
A printer driver installation screen appears when Standard TCP/IP port is detected.
10. Check that the name of the machine whose driver you want to install is selected, and then
click [Next].
11. Change the machine name if you want, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
12. Specify whether or not to share the machine, and then click [Next].
13. Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this
happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or
[Continue] to allow the auto play program to run.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Using the Standard TCP/IP Port
11
To Next Page
Loading...
