Aficio MP 2352 - Checking the Content of a Scanned Original (Preview before Transmission)

• You can program one of the Quick Operation keys with operations for this function. Using the
Quick Operation key allows you to omit steps 2 and 4. For details about Quick Operation Key,
see “General Settings”.
•
A paper jam during Parallel Memory Transmission may cause the transmission to fail even if
stamping is performed.
• You cannot turn the Stamp function on or off while an original is being scanned.
• p.171 "Changing the Default Functions of the Fax's Initial Display"
•
p.349 "General Settings"
Checking the Content of a Scanned Original (Preview Before Transmission)
The Preview Before Transmission function allows you to check the content of a scanned original before
you send it.
• To use this function, the optional HDD unit is required.
•
This function cannot be used with the following functions:
• Immediate Transmission
• Parallel Memory Transmission
• On Hook Dial
• Manual Dial
• SEP Code Reception
• When [Store Only] is set for [Store File]
• Transmission of a stored file only
• Memory File Transfer
1. Place the original, and then specify the scan settings you require.
Specify the “Original Orientation” setting correctly. If you do not, the top/bottom orientation of the
original will not be displayed correctly in the preview.
For details about the setting, see “Setting the Original Orientation”.
Placing Originals
65
1