Configuring the Scan Settings on a Client
Computer
This section explains how to configure a scan profile. A scan profile contains scan settings specified on a
client computer.
Changing a Scan Profile
Use the following procedure to change a scan profile.
Whenever the machine is first registered to a computer, a profile is created automatically. Using the
following procedure, you can change this profile on the computer.
1. On the [Start] menu, click [Control Panel].
Control Panel opens.
2. Click [Hardware and Sound].
You do not have to perform this step depending on the Control Panel settings.
3. Click [Scanners and Cameras].
The [Scanners and Cameras] dialog box appears.
4. Select this machine, and then click [Scan Profiles].
The [Scan Profiles] dialog box appears.
5. Select a profile, and then click [Edit].
The [Edit Profile] dialog box appears.
6. Configure the necessary settings.
For details, see “Scan Profile Items and Settings”.
7. Click [Save Profile].
The changed scan settings are saved as a profile.
To delete a profile, click [Delete] in the Scan Profiles dialog box displayed in step 4.
• If a profile does not appear in the [Scanners and Cameras] dialog box, the associated machine
might be turned off, or the required WSD scanner settings might not have been specified. For
details about WSD scanner settings, see "Preparation for Sending Files Using WSD".
•
If a profile does not appear in the [Scan Profiles] dialog box, recreate it as a new profile. For
details, see "Creating a New Scan Profile".
• You can create multiple profiles.
Configuring the Scan Settings on a Client Computer
103
To Next Page
Loading...
