Aficio MP 2352 - Installing the Postscript 3 Printer Driver (Windows Vista;7, Windows Server 2008;2008 R2)

10. Enter the machine name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name if necessary.
11. Click [Next >].
12. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
13. Check that the name of the machine whose driver you want to install is selected, and then
click [Next >].
14. Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
15. Specify whether or not to share the machine, and then click [Next >].
16. Specify whether or not to print a test page, and then click [Next >].
17. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server
2008/2008 R2)
This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows
Server 2008/2008 R2 for use on the Standard TCP/IP port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
• In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the SmartDeviceMonitor for
Client port.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
1. Windows Configuration
10
1