• To split a document into two sheets without using this function, see “Page Separation and Length
Reduction”.
• p.230 "Page Separation and Length Reduction"
•
p.389 "Parameter Settings"
TSI Print (Transmitting Subscriber Identification Print)
You can have the sender's Own Name or Own Fax Number printed on documents that this machine
receives.
Usually the sender's Fax Header is printed on received documents. When you receive an Internet Fax
document, the e-mail address of the sender is printed. If the sender has not programmed their Fax
Header, you will not be able to identify them. However, if you turn this function on, the sender's Own
Name or Own Fax Number is printed instead so you can find out where the document came from.
• You can turn this function on or off in the User Parameter (switch 02, bit 3) in the Facsimile Features
menu. See “Parameter Settings”.
• p.389 "Parameter Settings"
If There Is No Paper of the Correct Size
If there is no paper in the machine that matches the size of a received document, the machine will
choose a paper size based on the paper available.
If you have not set the same size paper in the paper tray, incoming fax documents are printed on the
nearest size available.
(mainly Europe and Asia)
For example, if your machine does not have A4 loaded and you receive an A4 size document, the
document is printed on A3. If your machine does not have A3 loaded and you receive an A3 size
document, the document is printed on two sheets of A4.
(mainly North America)
For example, if your machine does not have 8
1
/
2
× 11 loaded and you receive an 8
1
/
2
× 11 size
document, the document is printed on 11 × 17. If your machine does not have 11 × 17 loaded and you
receive an 11 × 17 size document, the document is printed on two sheets of 8
1
/
2
× 11.
3. Reception
232
To Next Page
Loading...
