Aficio MP 2352 - Specifying Tray for Lines; Tray Shift; Where Incoming Documents Are Delivered - Output Tray

Where Incoming Documents Are Delivered -
Output Tray
You can specify the output tray or output position to facilitate separation of received documents.
Specifying Tray for Lines
Use this function to specify the output tray for each line port.
You can specify the document feeding tray for each port (telephone, Internet Fax, IP-Fax). For example,
you can specify documents received through the G3-1 port to be fed to the “Finisher Upper Tray” and
documents received through the G3-2 port to be fed to the “Finisher Shift Tray”, facilitating separation
of files. You can also set the machine to output Internet Fax documents and ordinary faxes onto different
trays.
• The optional Internal tray 2, Internal Finisher, 500-Sheet Finisher, 1000-Sheet Finisher, or Booklet
Finisher is required to use this function.
•
The optional extra G3 interface unit is required to use the extra G3 line.
• To use this function, specify the port and destination using [Specify Tray for Lines] in the Facsimile
Features menu. For details about the setting, see “Reception Settings”.
• p.356 "Reception Settings"
Tray Shift
Use this function to shift the output position for each document, so you can separate received documents
easily.
When the optional finisher unit is selected for fax output, you can use the Tray Shift function whenever a
fax or report is printed.
This is useful for separating faxes stacked in the finisher output tray. For example, if the previous
incoming fax was output to the left, the next incoming fax will be output to the right and vice-versa.
• The optional Internal shift tray, Internal Finisher, 500-Sheet Finisher, 1000-Sheet Finisher, or
Booklet Finisher is required to use this function.
3. Reception
236
3