5. If a password has been set for the box, enter the password, and then press [OK].
If you make a mistake, press [Clear] before pressing [OK], and then try again.
To cancel entering a password, press [Cancel]. The display returns to that of step 4.
6. Press the [Start] key.
If you want two-sided printing, press [Print on 2 Sides] before pressing the [Start] key.
To stop printing before pressing the [Start] key, press [Cancel]. The display returns to that of step 4.
To stop printing after pressing the [Start] key, press [Stop Printing]. The display returns to that of step
4.
Repeat from step 4 to print another stored file in the box.
7. Press [Exit] twice.
The standby display appears.
Deleting Information Box Documents
This section explains how to delete a file stored in an Information Box.
1. Press [Change TX / Info].
2. Press [Store / Delete / Print Information Box File].
3. Press [Delete].
4. Changing/Confirming Communication Information
294
To Next Page
Loading...
