Aficio MP 2352 - Printing the Encryption Key

8. Press [OK].
9. Press [Exit].
10. Press [Exit].
11. Press the [User Tools/Counter] key.
12. Turn off the power and the main power switch, and then turn the main power switch back
on.
The machine will start to convert the data on the memory after you turn on the machine. Wait until
the message "Memory conversion complete. Turn the main power switch off." appears, and then
turn both the power and main power switches off again.
For details about turning off the power, see "Turning On/Off the Power", About This Machine.
Printing the Encryption Key
Use the following procedure to print the key again if it has been lost or misplaced.
• The encryption key is required for data recovery if the machine malfunctions. Be sure to store the
encryption key safely for retrieving backup data.
• If the encryption key update was not completed, the printed encryption key will not be valid.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Machine Data Encryption Settings].
If this item is not visible, press [ Next] to display more settings.
Encrypting Data on the Hard Disk
137
5