Using the LPR Port
This section explains how to install the PostScript 3 printer driver for use on the LPR port.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003 / 2003 R2)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server
2003 /2003 R2 for use on the LPR port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
In an IPv6 environment, you cannot use the LPR Port. Use the SmartDeviceMonitor for Client port.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
7. Click [Create a new port:].
8. Click [LPR Port] in [Type of port:], and then click [Next >].
9. Enter the machine's IP address in the [Name or address of server providing lpd:] box.
10. Enter "lp" in the [Name of printer or print queue on that server:] box, and then click [OK].
11. Check that the name of the machine whose driver you want to install is selected, and then
click [Next >].
12. Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
13. Specify whether or not to share the machine, and then click [Next >].
Using the LPR Port
15
To Next Page
Loading...
