Frequently Used Print Methods
This section explains how to use the various printing functions including normal printing, duplex printing,
and combine printing.
Each function described in this section is configured and registered in the [One Click Preset List:] area.
You can also change the parameters for each function by modifying "One Click Presets ". For details
about custom settings, see "Making Printer Settings - One Click Presets".
• If you send a print job via USB 2.0 while the machine is in Low Power mode or Sleep mode, an
error message might appear on your computer even though the job was printed. In this case, check
if the document was printed.
• p.53 "Making Printer Settings - One Click Presets"
Standard Printing
Use the following procedure to print documents using the normal printing function with the printer driver.
• Before printing, make sure that the settings for the installed options and loaded paper are correctly
configured.
For the PCL 6 printer driver:
1. After creating a document, open the [Printing Preferences] dialog box in the
document's native application.
The [Printing Preferences] dialog box appears.
2. Click the [One Click Presets] tab, if it is not already selected.
3. In the [Job Type:] list, select [Normal Print].
4. In the [Document Size:] list, select the size of the original to be printed.
5. In the [Orientation:] list, select [Portrait] or [Landscape] as the orientation of the
original.
6. In the [Input Tray:] list, select the paper tray that contains the paper you want to print
onto.
If you select [Auto Tray Select] in the [Input Tray:] list, the source tray is automatically selected
according to the paper size and type specified.
7. In the [Paper Type:] list, select the type of paper that is loaded in the paper tray.
8. If you want to print multiple copies, specify a number of sets in the [Copies:] box.
2. Printing Documents
68
To Next Page
Loading...
