10. Appendix
Supervisor Operations
The supervisor can delete an administrator's password and specify a new one.
If any of the administrators forgets their password or if any of the administrators changes, the supervisor
can assign a new password. If logged in using the supervisor's user name and password, you cannot
use normal functions or specify defaults.
Log in as the supervisor only to change an administrator's password.
• The default login user name is "supervisor" and the login password is blank. We recommend
changing the login user name and login password.
• When registering login user names and login passwords, you can specify up to 32 alphanumeric
characters and symbols. Keep in mind that user names and passwords are case-sensitive. User
names cannot contain numbers only, a space, colon (:), or quotation mark ("), nor can they be left
blank. For details about characters that the password can contain, see "Specifying the Extended
Security Functions".
• Be sure not to forget the supervisor login user name and login password. If you do forget them, a
service representative will have to return the machine to its default state. This will result in all data in
the machine being lost and the service call may not be free of charge.
• You cannot specify the same login user name for the supervisor and the administrators.
• Using Web Image Monitor, you can log in as the supervisor and delete an administrator's
password or specify a new one.
• p.257 "Specifying the Extended Security Functions"
Logging in as the Supervisor
If administrator authentication has been specified, log in using the supervisor login user name and login
password. This section describes how to log in.
1. Press the [User Tools/Counter] key.
2. Press the [Login/Logout] key.
3. Press [Login].
301
To Next Page
Loading...
