11. Check that the name of the machine whose driver you want to install is selected, and then
click [Next >].
12. Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
13. Specify whether or not to share the machine, and then click [Next >].
14. Specify whether or not to print a test page, and then click [Next >].
15. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
•
A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003 / 2003 R2 - IPP)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server
2003 /2003 R2 for use on the SmartDeviceMonitor for Client port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
1. Windows Configuration
22
To Next Page
Loading...
