Printing with Parallel Connection
This section explains how to install the PostScript 3 printer driver for use over a parallel port.
To use a machine connected using a parallel interface, click [LPT1] when installing the printer driver.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003 / 2003 R2)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server
2003 /2003 R2 for use over a parallel port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
•
You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
7. Select the port you want to use, and then click [Next >].
A dialog box for selecting the machine manufacturer and model name appears.
8. Select the name of the machine whose driver you want to install, and then click [Next >].
9. Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
10. Select whether or not to share the machine, and then click [Next >].
11. Specify whether or not to print a test page, and then click [Next >].
12. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
Printing with Parallel Connection
37
To Next Page
Loading...
