• For details about Web Image Monitor, see "Using Web Image Monitor".
•
For details about login user names and passwords, see Security Reference, which is the
administrator's manual.
• p.131 "Using Web Image Monitor"
Using Pure IP in the NetWare Environment
To configure this machine as a print server in a pure IP environment of NetWare, follow the procedure
below.
• If you want to create a print server queue in a pure IP environment of NetWare, create it on the file
server using NetWare Administrator.
•
This printer is not available as a remote printer for use in a pure IP environment.
• To use the printer in a pure IP environment, set it to IPv4.
Setting up using NWadmin
1. From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
2. Select the object in which the print queue is located in the directory tree, and then click
[Create] on the [Object] menu.
3. In the [Class of new object] box, click [Print Queue], and then click [OK].
4. In the [Print Queue Name] box, enter the name of the print queue.
5. In the [Print Queue Volume] box, click [Browse].
6. In the [Available objects] box, click the volume in which the print queue is created, and
then click [OK].
7. Check the settings, and then click [Create].
8. Select the object in which the printer is located, and then click [Create] on the [Object]
menu.
9. In the [Class of new object] box, click [Printer], and then click [OK].
10. In the [Printer name] box, enter the printer name.
11. Select the [Define additional properties] check box, and then click [Create].
12. Click [Assignments], and then click [Add] in the [Assignments] area.
13. In the [Available objects] box, click the queue you created, and then click [OK].
3. Using a Printer Server
126
To Next Page
Loading...
