Aficio MP 2352 - Netware

Printer Error Detection Function
msh> lpr prnerrchk {on|off}
• The default is "off".
If you set this to "on", the printer stops receiving data and will wait until the error is resolved before
continuing processing a job.
netware
Use the "netware" command to view and configure the NetWare settings such as the print server name
or file server name. The following commands are available only when the NetWare is installed.
NetWare Printer Server Names
msh> netware pname "character string"
• Enter the NetWare print server name using up to 47 characters.
NetWare File Server Names
msh> netware fname "character string"
• Enter the NetWare file server name using up to 47 characters.
Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
Remote Printer Number
msh> netware rnum [0-254]
• The default is 0.
Timeout
msh> netware timeout [3-255]
• The default is 15.
Printer server mode
msh> netware mode pserver
msh> netware mode ps
Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
NDS context name
msh> netware context "character string"
SAP interval
msh> netware sap_interval [0-3600]
Remote Maintenance Using telnet
169
4