Less than 90 ppi to Less than 300 ppi
Performs image smoothing only when the image has an image resolution (pixels per inch) less than
the respective value you have selected in the list.
• When [Auto] is selected, data processing may take a long time.
•
When Image Smoothing is used for a mask image, this function may have an undesired effect on
the print result.
Print Mode/ Toner Saving
Use this to select the toner saving mode.
The following table shows where you can select this function.
Windows
[Toner Saving:] is displayed on the [Print Quality]
menu in the [Printing Preferences] dialog box.
Mac OS X
[Print Mode] is displayed under [General 1] in
the [Feature Sets:] list on [Printer Features] in the
print dialog box.
Destination/ Output Tray
Use this to select an output tray.
The following table shows where you can select this function.
Windows
[Output Tray:] is displayed on the [Finishing]
menu in the [Printing Preferences] dialog box.
Mac OS X
[Destination] is displayed under [General 1] in
the [Feature Sets:] list on [Printer Features] in the
print dialog box.
• For details about output trays supported by this machine, see "Output Tray Settings (Type 1 and 2)"
or "Output Tray Settings (Type 3 and 4)", Network and System Settings Reference.
Printing a Document
81
To Next Page
Loading...
