Aficio MP 2352 - When Scanning Originals of Mixed Sizes Using TWAIN Scanner

• Originals are normally rectangular ( ) or horizontally long ( ). However, the table above uses
squares to make original orientation easier to understand. Even if the actual shape of the original is
different, the combination of original orientation and the orientation specified on the scanner driver
does not change.
•
For details about the Scanner Control dialog box, see the TWAIN driver Help.
• Depending on the settings, originals of different sizes are scanned differently.
When Scanning Originals of Mixed Sizes Using TWAIN Scanner
This section explains the differences between scanning mixed-size originals using the TWAIN scanner
and normal scanning.
•
If [Auto detect(Mixed-size)] is selected in the [Original Size:] list, the machine detects the length of
each original and then scans them.
• If [Auto detect(Uni-size)] is selected in the [Original Size:] list, the machine detects the size of the
first original of the batch and scans all subsequent originals at that size.
• The paper guides cannot be adjusted to small size originals, which may cause slightly tilted
scanning.
7. Scanning Originals with the Network TWAIN Scanner
162
7