7. Appendix
Using the Virtual Printer
This section explains the virtual printer function.
The virtual printer is a pseudo printer that can only be recognized on a network. The virtual printer has
various print options, such as feeding tray selection and duplex printing, which you can set in advance.
You can also use the interrupt printing function. This function suspends the ongoing job and gives priority
to a new job. If you use the virtual printer under UNIX, Solaris, and other operating systems, various
print functions are possible without you having to manually enter the usual print commands.
Adding a Virtual Printer
Use this procedure to add a virtual printer.
• Adding a virtual printer requires Administrators privilege. Log in using an account that has
Administrators privilege.
• The following Virtual Printer protocols are available: "TCP/IP (Unspecified, Normal)", "TCP/IP
(Unspecified, Priority)", "TCP/IP (DIPRINT)", "TCP/IP (RHPP)", and "NetWare".
1. Log in to Web Image Monitor as an administrator.
For details about login user names and passwords, see "Using Web Image Monitor", Network and
System Settings Reference.
2. In the menu area, click [Configuration], and then click [Virtual Printer Settings] in the
"Printer" category.
A list of the available virtual printers appears.
3. Click [Add].
The screen for adding virtual printers appears.
4. In [Virtual Printer Name], enter a name for the new printer, and then select the protocol in
the [Protocol] list.
5. Click [OK].
The virtual printer is added.
• If you select [TCP/IP (DIPRINT)], or [NetWare] in the [Protocol] list, you cannot specify a virtual
printer name.
• You can specify a virtual printer name using up to 47 characters.
163
To Next Page
Loading...
