General Settings
This section describes the user tools on the [General Settings] tab in [Scanner Features].
Switch Title
Select the title to be shown on the destination list.
Default: [Title 1]
Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the delivery server. To
use this function, it is necessary to set [Delivery Option] to [On].
For details about "Delivery Option", see "File Transfer", Network and System Settings Reference.
Search Destination
Select a destination list to be used in "Search Destination". To search from LDAP server, it is
necessary to register the LDAP server in [System Settings] and set [LDAP Search] to [On].
Default: [Address Book]
For details about "LDAP Search", see "Administrator Tools", Network and System Settings
Reference.
PC Scan Command Standby Time
If the machine receives a TWAIN or WSD (Pull Type) scanning request while it is writing data to
memory or performing e-mail, Scan to Folder, network delivery, or WSD scanning jobs, it switches
to the network TWAIN or WSD (Pull Type) scanner function either immediately or after a specified
standby time elapses following the last key operation.
Use this setting to select whether the machine switches to TWAIN or WSD (Pull Type) immediately
or waits until the standby time elapses when it receives a TWAIN or WSD (Pull Type) scanning
request.
Default: [On], 10 second(s)
If you select [Off], the machine will switch to the network TWAIN or WSD (Pull Type) scanner
function immediately.
If you select [On], enter a standby time using the number keys (3-30 seconds). The machine will
switch to the network TWAIN or WSD (Pull Type) scanner function when the time set here elapses
following the last key operation.
Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select [E-mail / Folder], [Delivery Server], or [WSD].
Default: [Delivery Server]
Destination List Display Priority 2
In the machine's address book, select which address book appears by default.
General Settings
201
To Next Page
Loading...
