Aficio MP 2352 - Windows Vista, Windows Server 2008 - USB

6. Check the printer driver location, and then click [Next >].
7. Select the name of the machine whose driver you want to install, and then click [Next >].
If the [Hardware Installation] message appears, click [Continue Anyway].
8. Click [Finish].
If installation is successful, the icon of the machine connected to the "USB001" port is added to the
[Printers and Faxes] window.
• The number after "USB" varies depending on the number of machines connected.
Windows Vista, Windows Server 2008 - USB
This section explains how to install the PostScript 3 printer driver under Windows Vista or Windows
Server 2008 for use over a USB interface.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
If the printer driver has already been installed, plug and play is enabled, and the icon of the machine
connected to the "USB" port is added to the [Printers] window.
The printer drivers can be installed from the CD-ROM provided with this machine.
If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from
the CD-ROM provided with this machine.
1. Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
2. In the Found New Hardware window, select [Locate and install driver software
(recommended)].
Click [Yes] or [Continue] if the [User Account Control] window appears.
3. When a message prompting insertion of the CD-ROM, insert the CD-ROM into the CD-
ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
4. Select the name of the machine whose driver you want to install, and then click [Next].
Installation of the printer driver is automatically started.
If "Windows can't verify the publisher of this software" display appears in the installation, click
[Install this driver software anyway].
1. Windows Configuration
34
1