• p.94 "If Error Occurs with the Specified Paper Size and Type"
Printing on Both Sides of Sheets
This section explains how to print on both sides of each page using the printer driver.
• When performing duplex printing, specify paper other than the following:
•
Thick (106 to 157 g/m2), Transparency, Labels, Preprinted, Envelope.
For the PCL 6 printer driver:
1. After creating a document, open the [Printing Preferences] dialog box in the
document's native application.
The [Printing Preferences] dialog box appears.
2. To use an existing One Click Presets, click the [One Click Presets] tab, and then click
the [2 sided] icon in the [One Click Preset List:] box.
If you do not wish to modify a custom setting that is already registered in the printer driver,
change settings such as paper size and source tray as required, and then proceed to step 8.
3. Click the [Detailed Settings] tab.
4. In the [Menu:] box, click the [Edit] icon.
5. To bind pages on an edge, select [Long Edge Bind(Open to Left/Top)] or [Short Edge
Bind(Open to Top/Left)] in the [2 sided:] list. To bind pages in the center, select
[Magazine] in the [Booklet:] list.
6. Change any other print settings if necessary.
7. To save current setting in the One Click Preset List, select the [Unregistered] icon in
[One Click Preset List:], and then click [Register Current Settings...]. Enter a name and
comment that describe the setting, and then click [OK].
The newly registered icon appears with registered name in the [One Click Preset List:] area.
8. Click [OK] to close the [Printing Preferences] dialog box.
9. Print the document using the print function in the document's native application.
For the PCL 5e printer driver:
1. After creating a document, open the [Printing Preferences] dialog box in the
document's native application.
The [Printing Preferences] dialog box appears.
2. In the [Duplex:] list, [Open to Left], [Open to Top], or [Booklet].
3. Change any other print settings if necessary.
2. Printing Documents
70
To Next Page
Loading...
