• When printing both sides
• If [Auto Tray Select] is selected in the [Input Tray:] list for the body paper, the paper will be
delivered from a tray containing paper in the orientation. Therefore, if the cover paper is set to
the orientation, the orientation of the output cover and body will be different.
•
The cover sheet/back cover sheet should be the same size and orientation as the body paper.
• The same paper feed tray can be set for the body of the document and the cover sheet/back cover
sheet.
• When loading a cover sheet/back cover sheet in the tray, set the relevant paper size.
• The cover sheet/back cover sheet can not be used when slip sheet is specified.
• For printing methods, see the printer driver Help.
Chapter Page
The specified page is printed on the same side as the first page, like a book. Also, you can insert chapter
slip sheets before specified pages.
• The same paper feed tray cannot be set for the body of the document and the slip sheet.
You can select one of the following chapter page settings:
•
Leave Blank: Inserts a blank sheet before specified pages.
• One Side: Prints on one side of inserted chapter slip sheets.
• Both Sides: Prints on both sides of inserted chapter slip sheets.
• Lead Chapter Page: Always prints a specified page on the same side as the first page.
The following illustrations show the output patterns for Leave Blank, One Side, and Lead Chapter Page.
2. Printing Documents
88
To Next Page
Loading...
