Aficio MP 2352 - Output Tray Settings

Default: [Internal Tray 1]
Output: Printer (printer)
Specify a tray to which documents are delivered.
Default: [Internal Tray 1]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is
pressed continuously.
Default: [Normal]
System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
Default: [On], [15 second(s)]
By selecting [On], you can specify a display time between 10 and 999 seconds.
Screen Colour Setting
You can select the screen color among from five types.
Default: [Marine Blue Type]
• For details on how to access System Settings, see "Accessing User Tools".
• p.18 "Accessing User Tools"
Output Tray Settings
This section describes the output tray settings.
•
Depending on the options installed on the machine, some trays might not be displayed.
• When the internal tray 2 is installed, [Internal Tray 2] is displayed.
• When 1000-sheet finisher or booklet finisher is installed, [Finisher Upper Tray] is displayed.
• When a finisher is installed, [Finisher Shift Tray] is displayed.
• If you select a setting that uses the finisher, the job might not be delivered to the specified output
tray.
• If you select punching, the job will be delivered to the finisher upper tray or the finisher shift
tray.
• If you select stapling or shift-sorting, the job will be delivered to the finisher shift tray.
General Features
23
1